Fundição a matriz de zinco versus fundição a matriz de alumínio: as principais diferenças explicadas
Choosing the best material for die casting is very important. Zinc and aluminum die casting are not the same. They differ in how strong they are, their weight, and how they are made. In 2025, industries care more about being eco-friendly and saving energy. Knowing these differences helps you pick strong and affordable options.
Key Takeaways
- Zinc die casting works well for strong, detailed shapes. It is tough and can make thin walls under 0.5mm.
- Aluminum die casting is great for lightweight uses. It is strong but light, perfect for cars and planes.
- Zinc casting needs less energy because it melts at lower heat. This makes it cheaper for making many items.
Material Properties Comparison
Strength and Durability
Zinc and aluminum are strong but in different ways. Zinc is great for impact resistance. It works well for locks, gears, and hinges. It handles stress without breaking, lasting a long time. Aluminum is lighter but still strong. It’s perfect for cars and airplanes because of its strength-to-weight ratio.
|
Metric |
Zinc Alloys |
Aluminum Alloys |
|
Strength-to-Weight Ratio |
Lower than aluminum, but very durable |
Higher, good for structural uses |
|
Impact Resistance |
Excellent, great for stress and wear |
Moderate, not as strong as zinc |
|
Durability |
Very good, handles stress without breaking |
Good, but less durable in some cases |
Weight and Density
Weight matters a lot in die casting. Zinc is heavier, with a density of 6.7-7.3 g/cm³. Aluminum is lighter, with a density of 2.5-2.9 g/cm³. Aluminum is better for lightweight parts like car and airplane pieces. Zinc’s weight makes it tougher and better at handling impacts.
|
Property |
Zinc Alloys |
Aluminum Alloys |
|
Density |
6.7-7.3 g/cm³ |
2.5-2.9 g/cm³ |
Corrosion Resistance
Zinc and aluminum resist rust differently. Zinc works well in dry or tropical places. Its corrosion rate is about 0.25 microns per year. But in marine or industrial areas, it rusts faster. Aluminum resists rust better in tough environments. It’s great for outdoor and marine uses.
Thermal and Electrical Conductivity
Zinc and aluminum both handle heat well when die-cast. Aluminum is slightly better in pure form. Zinc flows easily, making thin fins for heat sinks. Both are good for electricity, but aluminum is lighter and better for heat control.Manufacturing Process Differences
Melting Point and Casting Temperatures
The melting point affects how materials are cast. Zinc melts at 419°C, which is lower than aluminum at 660°C. This means zinc alloys are cast at less than 385°C (725°F), saving energy. Aluminum alloys need higher temperatures, between 621°C and 704°C (1150°F to 1300°F).
Casting zinc uses less energy and wears molds less. Aluminum casting needs more heat but works well for lightweight parts.
Tooling and Mold Requirements
Zinc die casting lasts longer because of its lower temperature. Molds wear out slower, making it cheaper for big projects. Aluminum die casting needs stronger tools due to higher heat. It’s great for making light parts for cars and planes.
Production Speed and Efficiency
Zinc die casting is faster because it cools quickly. It’s also easy to plate, which helps with small parts. Aluminum die casting takes more time but makes strong parts. It handles heat well and keeps shapes accurate. Both use high-pressure casting to reduce waste and make smooth surfaces.
Complexity of Shapes and Designs
Zinc die casting can make thin walls under 0.5mm. It flows well, creating detailed designs for small parts. Aluminum die casting works with walls from 1mm to 5mm. It’s less fluid, so extra steps may be needed for complex shapes.
Zinc is best for small, detailed designs. Aluminum works better for bigger, simpler parts.
Zinc and aluminum die casting are different in many ways. Zinc is precise and quick to produce. Aluminum is light, strong, and resists rust well.
Aluminum is great for cars and planes because it’s light and tough. Zinc works best for electronics and home items, offering accuracy and strength. zcprecision provides top-notch die casting services for all your needs.
FAQ
What are the main advantages of zinc die casting?
- Zinc is strong, tough, and very precise.
- It can make thin walls and detailed shapes.
- Its low melting point saves energy.
Why is aluminum preferred for lightweight applications?
Aluminum is light but very strong. It works well for cars and planes. Using lighter parts helps them perform better and use less fuel.Tip: Pick aluminum for light, rust-proof parts. Use zinc for strong, detailed items.
